Hydrastar Replacement Gasket
Hydrastar Replacement Gasket to suit 1200psi and 1600psi Hydrastar models
Hydrastar replacement gasket to suit 1200psi and 1600psi Hydrastar Electric controllers. Accidents happen, and there is a replacement gasket available.
Beware of perished gaskets.
Old gaskets can be almost impossible to remove. You are quite fortunate if you can withdraw your gasket intact.
When replacing your circuit board, it is also a good idea to replace the gasket.
This gasket suits the new Australian version of Gen 7 hydrastar and also fits all previous hydrastar versions and works.
DIY install. Make a drawing of the terminals and where they are located. Remove spade terminals, and remove the circuit board from the housing.
Install wires onto the new circuit board and reinsert them into the housing.
Please ensure your gaskets are clean before applying the gasket seal and reseal housing onto the body.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 15 × 10 × 0.1 cm |
