IN STOCK
Breakaway System Kit
Break-Away Specifications
A breakaway system is essentially an emergency braking system that is separate from the primary braking system. It is designed to activate in the event of a catastrophic brake failure.
N.B. Brake-away systems are mandatory for all trailers/caravans over 2000kg ATM.
Installing Breakaway Battery Magnetic Monitor.
- Connect the battery indicator cable directly to the breakaway battery, insert the 10 amp fuse inline and close to the battery.
- If the battery indicator flashes RED, only the breakaway battery is low on amp hour.
- If the Battery indicator does not illuminate, recharge or replace the breakaway battery.
- The battery indicator will switch off when the battery is lower than 11 to 9 volts.
- The battery indicator draws low milliamps and will continually pulsate different flashing colours on a battery for 12 months.
- Recharge the battery using a battery charger if the breakaway battery is flat.
Warnings / Important Information
Disconnect the trailer plug when testing the breakaway kit. Failure to do so may severely damage the vehicle’s Electric brake controller.
Your breakaway battery will require replacement when you cannot get a green light on your control panel.
In Australia, the test button must indicate:
- Full Battery Power is Available.
- Battery Charging.
- Battery flat
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 15 × 15 × 15 cm |
