Light-Duty Bearing Dolly
LM / SL / Composite / PLL
How to install bearing cups
- Remove the old bearings then clean out the old grease.
- Tap in the outer cup until it is flush with the hub boss.
- Grab the bearing dolly and hold it vertically before giving it one smack with a lump hammer. This smack gets the cup started and before the hub journal. You should be able to feel the dolly stabilise on the outer side of the hub journals.
- Hold the dolly vertically and smack it home with the hammer. Once you hear a sound change, the cup has bedded itself on the bottom shoulder, and the job is finished.
- Lastly, turn the hub over and repeat the procedure on the other side.
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 15 × 8 × 8 cm |
