1600 psi Hydrastar Hydraulic Electric Brake Actuator
1600 psi Hydrastar Electric Hydraulic Disc Brake Actuator
1600 psi Hydrastar electric hydraulic disc brake actuator generation 7 suits boat tandem trailers from 2000kg to 3200kg.
How to Select the Correct Actuator
- 1000 PSI Actuators are suitable for trailers under 2000kg (Couplemate does not sell this model)
- 1200 PSI Actuators are ideal for trailers UP TO 3200kg
- 1600 PSI Actuators are suitable for trailers UP TO 4500kg
The brake controller controls the maximum hydraulic pressure applied to the brakes.
The Hydrastar actuator pump requires a 12-volt DC Tekonsha P2 or P3 hard-wired controller. Check with your brake controller supplier for suitability.
The Tekonsha iPrimus is not suitable when used with hydrastar controllers.
An electric over-hydraulic actuator requires an electric brake controller to send a signal to work a hydraulic pump actuator. Hydraulic brakes are used on boat trailers weighing over 2000kg.
The Hydrastar troubleshooting guide is here.
Question: What type of hydraulic braking system suits the Hydrastar Actuator
Answer: The Hydrastar Actuator is ideal for controlling the following disc braking systems.
- Independent Coil Suspension Kit – Hydraulic
- 50mm Square Hydraulic Disc Brake Axle
- 60mm Round 2t – 3t Hydraulic Disc Braked Axle
- 3t Hydraulic Disc Braked Axle
Also, consider your disc pads to improve braking efficiency.
Why do I need this type of brake controller?
The Law requires trailers over 2t to install a breakaway kit on their trailer or caravan.
Couplemate has good stocks of this product and ships from Brisbane.
Carlisle offers a 2-year warranty on all HydraStar units against faulty craftsmanship. Warranty issues are handled here in Australia.
Variations
- 1200 psi to suit boat trailers from 2t to 3.5t - Installation Instructions and Wiring Diagram Downloadable after Purchase.
- 1600 psi to suit boat trailers over 3.5t and up to 4.5t - Installation Instructions and Wiring Diagram Downloadable after Purchase.
Hydrastar Actuator Specifications
- Application: single or tandem-axle trailers with disc brakes
- Maximum output pressure: 1,200 - 1,600 psi
- Power: 12V DC
- Hydraulic port size: 3/16 inch
- Dimensions: 11-3/4 inch long x 3-inch wide x 7-3/8 inch tall
- Wire configuration:
- Black: 12-volt power
- Blue: brake controller
- Yellow: breakaway
- White: ground
- 2-Year limited warranty
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 40 × 20 × 10 cm |
