1-inch Axle Thrust Washer
1-inch Axle Thrust Washer
1-inch axle thrust washer designed by Active Fabrications to fit Al-ko and Couplemate 10 inch parallel drums onto their axles.
For example, an Al-ko drum will not fit correctly on an AF-turned axle unless you are use a thrust washer.
The bearings cannot be pre-loaded or adjusted without this washer.
Have you tighten the axle as far as you can and the hub is still not tight?
The only thing you can do is call us and get a few of these specially machined washers.
Your trailer, caravan or camper will not go far if you have not found this solution.
Finally, other associated parts can be found at these links.
- 5mm Split Pin
- 12TPI Axle Nut
- 14TPI Axle Nut - Alko
- 1 inch Sstandard Washer
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 3 × 3 × 1 cm |
