45mm Square Ford Galvanised Hydraulic Disc Brake Axle
Due to their anti-corrosive characteristics, 45mm square galvanised hydraulic disc brake axle kits are suitable for boat trailers.
The 45mm square hydraulic disc assembly is our most popular seller.
Hydraulic Disc brakes are for use on boat trailers due to the anti-corrosive characteristics of galvanised disc brake callipers.
This disc brake kit includes:
- 45mm Square Galvanised Axle rated @ 1450kg
- 1 x Pair Hydraulic Brake Calipers
- 1 x Pair of Anchor Plates welded to the axle
- 2 x 7/16" Caliper Bolts + Washer
- Pair of Galvanised Disc Brake Rotors
- 2 x Japanese Slimline Bearings Sets.
Couplemate has axles to suit the following wheel stud patterns;
- Ford SL.
- HT Holden SL.
- HQ Holden SL.
- Commodore SL.
- 5 Stud Landcruiser SL.
- 6 Stud Landcruiser SL.
- 5 Stud Landcruiser Parallel.
- 6 Stud Landcruiser Parallel.
Still unsure of what measurements to take? Check out this handy guide below:
[P] - Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] - Overall axle length (tip to tip)
[F] - Hub face to hub face measurement
[A] - Chassis width
[C] - Tyre clearance
[B] - Back offset
[H] - Tyre to chassis
[G] - Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination which can be done by pulling off a hub and bearings, and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing number.
45mm Square Hydraulic Galvanised Disc Brake Axle Kit
Additional information
| Weight | 70 kg |
|---|---|
| Dimensions | 240 × 50 × 50 cm |
