5S Landcruiser Hydraulic ICS (1600kg – 1800kg)
Disc / 5 x 150mm (9/16″) / PLL / Gal upgrade available
Independent Coil Suspension Specifications
Read the complete Installation & Alignment Guide here. The specifications below are based on a fully loaded trailer.
- Standard Ride Height: 297mm
- Maximum Compression: 70mm
- Optimal Coil Range: 1250kg-1450kg Each
- Maximum Weight Capacity
- Single: 2250kg
- Tandem: 4500kg
Engineering diagram of the Couplemate™ Independent Suspension frames. Units in millimetres.
Frequently Asked Questions
Is 2000kg – 2250kg Right For Me?
Australian Design Rules (ADR) stipulate that your suspension should be rated at least 20% higher than the actual weight you intend to tow. For instance, if your towing load is approximately 2000kg, opting for a suspension system rated at 2250kg is advisable.
This weight range is right if your trailer weight (plus 20%) sits within the 1600-1800kf or 2000kg-2250kg mark. This ensures the proper functioning and safety of the suspension system and is the optimal coil spring range.
Can I Upgrade the Weight Capacity Later?
Yes! If you might upgrade your trailer/caravan ATM, later on, you can easily upgrade your Independent Coil Suspension, too.
When designing this suspension, Couplemate™ engineers prioritised strength and adaptability. You do not need to modify the suspension frame nor the dual shocks, but upgrade your coil spring and independent stub axle.
What Ride Heights Do You Offer?
Our suspension runs approximately 139.7mm higher than a standard spring and beam trailer leaf spring suspension. Couplemate™ offers three options for ride heights which operate at the following estimated measurements:
If you’re looking to install the Independent Coil Suspension on a Boat Trailer, you’ll likely want to lower the ride height slightly. Feel free to contact our team if you have any questions!
Additional information
| Weight | 99 kg |
|---|---|
| Dimensions | 120 × 120 × 60 cm |
